The Ultimate DIY Water Filter! - The "2 Stage" (carbon+heated coil) purifier! - uses no electricity!

The Ultimate DIY Water Filter! – The "2 Stage" (carbon+heated coil) purifier! – uses no electricity!



Ultimate DIY Water Filter! This Homemade Water Purifier is extremely effective and super easy to make. The “2 Stage” design purifies almost all water sources to 99.999%. Starts to produce clean/clear (super hot) water within 20 seconds! uses no electricity. great to have in a SHTF/Emergency situation or for everyday use. *also doubles as a water heater and stove burner!. you can cook on top of the coil at the same time the water is heating/purifing! water purifier, water heater and stove all in one! *and with the exception of the activated carbon and the copper coil, the filter is made almost entirely out of “free stuff” (recycled/reused metal cans, plastic bottle, glass jar – along with sand and gravel). note that the “1st stage” of the filter (activated carbon part) removes predominantly the chemical impurities (along with bad taste/color/odor/sediment). while the “2nd stage” (heated coil) predominantly removes the biological contaminants (parasites/bacteria/viruses etc…) when used together they’re extremely effective as a filtering system. should purify almost all water sources. note – one of the few things it won’t remove is salt from salt water and certain minerals. of interest: total length of copper tubing is 10 ft. tubing is 1/4″. a crumpled up piece of coffee filter paper can be used in place of the cotton balls. i was able to purifiy 12oz of water every 3 mins or so (about 1/2 gallon every 15 mins). it uses about 25 cents worth of 70% isopropyl alcohol to purify a gallon. (i imagine in a pinch, since the can that holds the copper coil is very similar to a tin can stove, you could use small sticks, twigs and leaves as a fuel source instead of the alcohol). Of note: it only “steams up” for a few seconds every few minutes or so. most of the time the flow of escaping water vapor/steam is light and barely visible.

Original Video Source

DIY 6 Gallon Ceramic Gravity Water Filter / Budget Filtration System / ProPur ProBlack-D

DIY 6 Gallon Ceramic Gravity Water Filter / Budget Filtration System / ProPur ProBlack-D



This video shows how to make a home made ProPur gravity style water filtration system, using ceramic, charcoal and silver impregnated filters. This system cost $35 in parts (not including filters which are about $95 per pair), using food grade buckets and fittings easily obtainable from home brew stores for a total price of $130. Comparable commercial systems run around $350. Cost per gallon is about 2 cents. This portable system is good for emergencies and when SHTF if water is treated with bleach, purification tablets or boiling.
Filters:
SHTFandGO Candle Ceramic Filter Black 7 inch Silver Carbon with Activated Carbon (QTY-2)

Royal Berkey Water Filter System RB4X2 with 2 Berkey Black Filters and 2 Fluoride Filters Bundled with One Stainless Steel Live Healthy Water Bottle:

Original Video Source