How to Choose the Right Water Filter | Ask This Old House

How to Choose the Right Water Filter | Ask This Old House



Ask This Old House plumbing and heating expert Richard Trethewey explains how to choose the right water filter for different water quality issues.
SUBSCRIBE to This Old House:

Time: at least 1 hour

Cost: $20-$1000

Skill Level: Beginner

Shopping List:
Water quality test kit
Water filter

Steps:
1. Purchase a water quality home test kit.
2. Follow the instructions on the kit and wait for results on water quality issues.
3. Based on the results of the test, choose a filter that will treat the water quality issue.

Resources:
All the filters Richard demonstrated, including the granular activated carbon filters, sink mounted filters, sediment filters, and water softeners can be purchased at a home center or plumbing supply store.

Expert assistance for this segment was provided by Morris Merchants (

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook:
Twitter:

Pinterest:
Instagram:

Tumblr:

For more on This Old House and Ask This Old House, visit us at:

How to Choose the Right Water Filter | Ask This Old House

Original Video Source

Water Filter Installation

Water Filter Installation



Water Filter Installation. A few tricks and tips to make your bathroom installation a whole lot easier. See how to connect the pipes and fittings to the kitchen sink, sink, toilet water lines using PEX water lines and PEX fittings. How to install a drain system, different ways to configure it for your own situation.This is the BEST plumbing solution for beginner DIY plumbers. In this bathroom training video you will learn how to use PEX and copper water lines and fittings to quickly and easily plumb your new bathroom! Bathroom Plumbing is simple to do if you have the right instructions to follow. Watch this diy bathroom plumbing video and learn a few Pro secrets for getting your sink water lines installed right the first time.

Original Video Source

How to Install a Whole-House Water Filter | Ask This Old House

How to Install a Whole-House Water Filter | Ask This Old House



Ask This Old House plumbing and heating expert Richard Trethewey improves the taste and odor of municipal drinking water with a whole house filtration system that includes a sediment filter and a granulated activated carbon filter.
SUBSCRIBE to This Old House:

Time: 2-3 hours

Cost: $1,000

Skill Level: Moderate

Tools List:
Tubing Cutter
Fitting Brush/Pipe Cleaner
Torch

Shopping List:
Whole House Filtration System
Copper Pipe and Fittings
3 Copper Ball Valves
Adapter Fittings to Connect Filters
Flux
Solder
Thread Sealing Tape

Steps:
1. Turn off the main plumbing supply to the house and drain as much water as possible from the pipes by opening all faucets and fixtures and then opening a drawoff valve near the main.
2. Determine the location of the prefilter. If necessary, attach a piece of plywood for attaching the filter bracket.
3. Use a tubing cutter to cut in to the main water supply pipe.
4. Clean, apply flux, and solder the adapter fittings to transition into the filter housing on a workbench to keep the heat away from the filter. Once cool, connect the adapter fittings to the filter housing, using thread sealing tape on threaded connections.
5. Clean, flux, and then dryfit the remaining connections. Include “T” fittings that allow water into and out of the filter, but also connect to a shutoff valve that serves as a bypass. Include a shutoff valve for water entering the filter and a shutoff valve for water leaving the filter.
6. In normal operation, the bypass valve remains in the closed position and the two filter valves are in the open position. If the filter requires service, those valves should be reversed, allowing untreated water into the building temporarily.
7. Once all connections have been made, turn water pressure back on to the building and check for leaks.
8. Follow manufacturer instructions to properly activate the carbon filter.

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook:
Twitter:

Pinterest:
Instagram:

Tumblr:

For more on This Old House and Ask This Old House, visit us at:

How to Install a Whole-House Water Filter | Ask This Old House

Original Video Source